Current Ratio vs Quick Ratio: Meaning, Formulas, and Which to Use

Blog by Aliceblue News Desk

17 November 2026

8 minutes

Alice Blue - Growth Inevitable

You are checking an FMCG stock. Profits look steady, but the company has bills to clear in the next 12 months. Does it have the cash to clear them, or is its money tied up in unsold stock?

The current ratio and quick ratio answer that question. Both compare what a company has in the short term with what it owes in the short term. The quick ratio is the tougher one because it ignores unsold stock. This guide explains current ratio vs quick ratio in plain words, with formulas, an example, and real numbers from Indian stocks.

Table of Contents

Quick Answer

The current ratio divides all current assets by current liabilities. The quick ratio does the same after removing inventory (unsold stock) and, in some versions, prepaid expenses. The quick ratio is stricter because stock can take time to sell. If the two numbers are far apart, the company leans on its stock to pay its bills.

What Are the Current Ratio and Quick Ratio?

Both are liquidity ratios. Liquidity means how fast something turns into cash.

Two terms come up in every formula:

  • Current assets: cash, bank balance, money customers still owe you (receivables) and unsold stock (inventory). All of it should turn into cash within a year.
  • Current liabilities: bills due within a year, such as supplier payments, short-term loans, and taxes.

Picture a kirana store with a full godown and ₹2,000 in the till. The supplier wants ₹50,000 tomorrow. The stock is worth plenty on paper, but it won’t pay tomorrow’s bill. The current ratio counts that stock. The quick ratio doesn’t.

Current Ratio Formula and Quick Ratio Formula

Current ratio = Current assets ÷ Current liabilities

Quick ratio = (Current assets − Inventory) ÷ Current liabilities

Websites don’t all calculate the quick ratio the same way. Some also subtract prepaid expenses, which are costs the company paid in advance. Others add up only cash, receivables, and short-term investments. The answers are usually close but not identical, so use one source when you compare companies.

The quick ratio is also called the acid test ratio.

How to Calculate Both, Step by Step

  1. Open the company’s latest balance sheet on NSE, BSE or in the annual report.
  2. Add up current assets.
  3. Add up current liabilities.
  4. Divide current assets by current liabilities. That is the current ratio.
  5. Subtract inventory from current assets.
  6. Divide what’s left by current liabilities. That is the quick ratio.
  7. Compare with the company’s own past years and with its peers.

Step 7 does most of the work. A ratio of 1.2 can be fine in one sector and risky in another.

Example With Numbers

Here are two made up companies. Both owe ₹200 crore in the next 12 months.

₹ crore

Textile maker

Software firm

Cash and bank

20

150

Receivables

60

170

Inventory

270

5

Current assets

350

325

Current liabilities

200

200

Current ratio

1.75

1.63

Quick ratio

0.40

1.60

The textile maker looks better on the current ratio. But ₹270 crore of its ₹350 crore is stock. If demand slows, it may have to cut prices to raise cash. The quick ratio of 0.40 shows that risk. The software firm could pay its bills almost entirely from cash and receivables.

Quick Ratios of Real Indian Stocks

Here are quick ratios of listed companies as shown on Upstox. These are examples of how the number varies, not recommendations.

Company

Sector

Quick ratio

Source date

Hindustan Unilever

FMCG

0.92

16 Nov 2026

Page Industries

Innerwear

0.77

Upstox page shows no date

SAIL

Steel

0.28

16 Nov 2026

Tata Steel

Steel

0.26

16 Nov 2026

Both steel companies sit far below 1, and Hindustan Unilever, a large listed FMCG company, sits just under it. So a quick ratio under 1 doesn’t automatically mean trouble. Compare with the company’s own sector and history.

One reading also isn’t enough. Page Industries’ standalone quick ratio was 0.63 in March 2022, 0.31 in March 2023, 0.75 in March 2024, 0.87 in March 2025 and 0.77 in March 2026. Data sources can also differ because of standalone and consolidated accounts, so note the source whenever you quote a number.

Current Ratio vs Quick Ratio: Key Differences

Point

Current ratio

Quick ratio

What it counts

All current assets

Cash, receivables, and short-term investments

Inventory

Included

Excluded

Strictness

Broad

Stricter

Common benchmark

Around 2:1 is typically seen as good

1:1 is seen as ideal

Looks weaker for

Rarely

Stock-heavy businesses

Best for

A first look at short-term health

A stress check

The quick ratio can never be higher than the current ratio. It starts from the same numbers and removes something.

Which Is Better, Current Ratio or Quick Ratio?

Don’t pick one. Check both.

Start with the current ratio for a quick read. Then look at the quick ratio, especially for companies that hold a lot of stock. Inventory takes a longer time to turn into cash than receivables do.

A big gap between the two means the company is sitting on stock. A small gap means it holds very little.

What Is a Good Current Ratio and Quick Ratio?

A current ratio above 1 means current assets cover current liabilities. Alice Blue’s guide treats around 2:1 as typically good. For the quick ratio, 1:1 is the usual ideal, and a value below 1 means the company may not clear all its short-term bills from liquid assets.

Treat these as starting points. The table above shows that large, listed Indian companies often sit below them. Compare a company with its own sector and its own history.

Advantages

  • Quick screening. You can drop weak companies in minutes. One public Screener.In Screener, for instance, filters for current ratio above 1.5 and quick ratio above 1.
  • Early warning. If a ratio keeps falling over a few years, cash may be getting tight.
  • Shows reliance on stock. Comparing the two tells you how much the company needs its inventory to sell.
  • Helps with IPOs. The current ratio is among the ratios used to judge a company before an IPO. 
  • Easy to find. The data is on every balance sheet and most stock pages.

Risks and Limitations

  • A snapshot. The ratio uses past data from one balance sheet date, so it can mislead about the future.
  • Receivables may not turn into cash. Customers can pay late, or never. The quick ratio assumes they pay on time.
  • Compare with peers. The ratio alone says little. It needs industry and competitor context.
  • High inventory businesses. A supermarket’s stock sells at a known price, so the quick ratio can understate its liquidity.
  • No view on price. A strong ratio doesn’t say whether a share is fairly priced.
  • Bias. People tend to ignore a weak ratio on a stock they already like. Check it before you buy, not after.

Tips for Beginners

  • Look at both ratios side by side every time.
  • Compare a steel company with steel companies, not with FMCG.
  • Pull five years of data to see the direction.
  • Ask how long customers take to pay.
  • Check the company’s debt too. A decent ratio with heavy borrowing still carries risk.
  • Use these ratios to drop risky stocks. They won’t tell you which stock to buy.

When you’re ready to research stocks yourself, you can open a demat account with Alice Blue and read company financials before you invest.

Common Mistakes to Avoid

  • Treating 1 as a pass mark for everyone. The table above shows steel and FMCG sit in different places. Compare within the sector.
  • Ignoring old stock. Unsold or outdated inventory inflates the current ratio. Check how quickly the company sells.
  • Mixing formulas. If one site subtracts prepaid expenses and another doesn’t, the numbers won’t match.
  • Reading one year. A single reading can mislead, as Page Industries’ history shows.
  • Chasing the highest number. A very high ratio may mean idle cash.

Who Should Use These Ratios?

Long-term investors who read company financials before buying get the most from them. Swing traders who hold for weeks can use them to avoid companies with cash stress. IPO applicants can use them to check a new company’s strength.

If you trade intraday, skip them. Price and volume matter more there. Also skip them for banks and finance companies, whose balance sheets work differently.

Conclusion

The current ratio shows whether short-term assets cover short-term bills. The quick ratio checks the same thing without inventory, so it is stricter. A large gap tells you the company leans on its stock. Real Indian numbers vary, with Hindustan Unilever at 0.92 and Tata Steel at 0.26 on the quick ratio. Compare a company only with its peers and its own past years. Also look at debt, profits, and valuation before you invest.

FAQs

Edit Content

The current ratio counts all current assets, including inventory. The quick ratio leaves out inventory and, in some versions, prepaid expenses. That makes it the stricter test.

Edit Content

Neither is better alone. The current ratio gives a broad first look, and the quick ratio shows whether the company can pay without selling stock. Check both.

Edit Content

Above 1 means current assets cover current liabilities, and around 2:1 is typically seen as good. The right level depends on the sector.

Edit Content

A quick ratio of 1:1 is considered ideal. Many large Indian companies sit below it, so compare with peers before you worry.

Edit Content

It is another name for the quick ratio. It tests whether a company can pay its short-term bills without selling inventory.

avatar

Blog by Aliceblue News Desk

The Alice Blue Research Team is a passionate group of analysts delivering expert market insights, comprehensive coverage of stocks, economy, commodities, and personal finance through clear, actionable research.

Take your first step into the market with ₹0 opening charges

Open Free Demat Account
Alice Blue mobile app with 1lyAlgos